©2015 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
81
User Manual
/
AER3100/AER3150
•
Allow Traffic
(default)
•
Deny Traffic
With
Allow Traffic
selected, the device will act like a typical router without
Threat Management
enabled and
route traffic as usual. If security is a huge concern, however, you may wish to select
Deny Traffic
to stop all
traffic when
Threat Management
isn’t working properly.
Application ID Logging
: (Disabled by default.) The DPI engine can identify network traffic applications and send
this information to the system logs. Depending on your network traffic uses, application ID logging may send
huge amounts of data to the system logs. Cradlepoint recommends enabling a syslog server to manage this
information.
To view the logs, go to
STATUS > System Logs
. For configuration options, including syslog server setup, go to
SYSTEM > Administration >
System Logging
.
Signature Update Schedule
You can choose to have a different signature update
schedule for modems than for other WANs. This is
intended to protect against overages when data usage
limits for 3G/4G modems are restricted. For both
Non-
Modem WANs
and
Modem WANs
, first choose the
Frequency
for updates:
•
Never
•
Daily
•
Weekly
•
Monthly
Next, choose the specific day and time. These updates
cause a minor network disruption, so schedule updates for
times with less critical traffic.
Signature Settings
View a list of all signature categories, all signatures, or
signatures within a category.
By default, the
Operation Mode
is set under
Global
Settings
. To edit this for a category or a particular
signature, select a line in the table and click
Edit
. Choose
from the following:
•
Disabled
•
Detect and Prevent
–
IPS
mode
•
Detect Only
–
IDS
mode
