O
PERATION
5-20
D
OC
.01040086
R
EV
.7
5.4.9
lP Settings Screen
The IP settings screen is used to set up to the network address of the amplifier. Whenever the
IP settings are changed a system reset is required before they will be functionally set. To change
settings, type them in and click the
APPLY
button.
Figure 5-25. IP Settings
5.4.10 Email
Screen
The email screen can be set up to send the alarm/fault and the meter log to an assigned e-mail
address. The
HOLD OFF
period can be set to a user specified time in minutes, which the
amplifier will not send the same fault/alarm message. Alarm/fault events and meter logs will
be sent when the check box is marked and the
SUBMIT
button is clicked.
RESET
will clear all
entries on the email screen.
Figure 5-25. Email
Summary of Contents for S4UIA
