O
PERATION
D
OC
.01040086
R
EV
.7
5-13
5.3.5.5 Screen
Configuration
The SCREEN CFG allows the operator to select where and what data field is displayed on the
main screen. Fields can be changed while in the setup menu by using the left/right arrow keys
to change data fields and using ENTER to save the change. Figure 5-16 shows the main screen
configuration.
Figure 5-16. Configuration Screen
5.3.5.6 Version
The type, model, and serial number will be displayed in VERSION. The boot and main software
version of the main board or FP board will also be displayed. There are no values that can be
changed in the VERSION display. Figure 5-17 displays the typical version display.
Figure 5-17. Version Display
5.3.5.7 Switch
System
The SWITCH will only be displayed in the MENU key if it has been chosen in the SETUP menu.
A switch system is optionally installed and comes with its own manual. In SWITCH a graphical
representation of the switch will be shown. The switch or switches can be controlled using
SWITCH by selecting the switch and pressing enter to change its position.
Summary of Contents for S4UIA
