![background image](http://html1.mh-extra.com/html/cpi/s4uia/s4uia_installation-and-operation-manual_2674994028.webp)
E
XTERNAL
I
NTERFACES
3-2
D
OC
.01040045
R
EV
.6
3.1 Overview
The Indoor SSPA has external interfaces that allow it to connect to many optional external
devices. The interfaces located on at the rear of the unit are:
•
CIF serial port RS-232
•
CIF serial port RS-422/485
•
Diagnostic Interface
•
Discrete interface
•
Ethernet interface
3.1.1 RS-232
Serial
Port
The operator can use a PC with a RS-232 adapter at distances up to 3m. Table 3-1 can be used to
design a cable or a cable may be purchased to connect the Indoor SSPA directly to a computer.
The CIF protocol must be set to RS-232 using the front panel setup menu.
Note: TX and RX functionality is from the standpoint of the amplifier: TX is
an output and RX is an input.
Table 3-1. J7 CIF Serial Port RS-232 Pin-out
Pin Number
Function
1 Chassis
GND
2
RS-232C Tx
3
RS-232C Rx or RS-422/485 Rx -
4
RS-422/485 Tx -
5
RS-232 or RS-422/485 GND
6
RS-422/485 Tx +
7 No
Connect
8 No
Connect
9
RS-422/485 Rx +
Summary of Contents for S4UIA
