![background image](http://html1.mh-extra.com/html/cpi/s4uia/s4uia_installation-and-operation-manual_2674994026.webp)
UNPACKING & INSTALLATION
2-10
D
OC
.01040044
R
EV
.6
2.6.6.3 RF Input Monitor (J5) (Optional)
The RF input power can be monitored from this 50-
Ω
, N-type, female connector, located on the
back panel at a -20 dB nominal coupling. The calibration data is available on the front panel
display.
2.6.6.4 BUC Input with BUC Bypass (J16) (Optional)
This port is the L-Band input frequency to the BUC when the BUC bypass is installed. The
10MHz reference to the BUC is supplied either internally or multiplexed with the L-Band input
signal.
2.6.6.5 BUC Bypass (J17) (Optional)
The BUC bypass J17 must be connected to RF input J2 using the RF jumper cable provided if the
L-Band input signal is applied to J16. Connect the input signal directly to J2 if the frequency
band of the SSPA is being used and the BUC is bypassed.
Summary of Contents for S4UIA
