![background image](http://html1.mh-extra.com/html/cpi/cls-advance/cls-advance_operators-manual_2675010042.webp)
42
OM_CLS_-_EN_2-0
Technical characteristics
CLS
Advance
Device dimensions
Height:
250 mm
Width:
300 mm
Depth:
485 mm (including coin return tray)
420 mm (without coin return tray)
Coin-in – coin-out distance: 248 mm (ADA-compliant)
For exact installation dimensions please refer to
Chap. "9.5 Installation & service
Device weight
14.5 kg (without coins)
Mounting position
Horizontal, max. deviation: ± 2°
Directives applied
EMC: 2014/30/EU
EN 55 014-2 (interference resistance)
EN 55 032 Class B (interference emission)
(cf. Declaration of Conformity)
Coin-in – coin-out distance is ADA-compliant
Certification marks
CE/UL
9.2
Reliability figures
9.2.1
Failure rates
Performance increases with decreased coin feeding speed. The following failure rates are valid for
a coin feeding speed of up to 10 coins per second:
Average accountancy error rate
1:10,000 (wrong sorting, counters)
Average operator call error rate
1:50,000 (store staff measures such as clearing jams)
Average service call error rate
1:500,000 (service staff measures such as replacing parts)
9.2.2
Replacement intervals
The below figures are average values based on millions of tested transactions under various circum-
stances and with different currencies. Due to a high-frequent use of coins with specific properties,
such as very sharp and thin edges or rims of polygonal coins, the lifetime figures can vary.
CLS Advance part
Replace part every ... coin cycles
(please contact service partner)
MCBIF*
Replacement(s) per lifetime
Coin barrier/curtain
500,000
500,000 8
Transport belt motor
3,000,000 1,500,000 1
Bearing & belt
2,000,000 1,500,000 1
Centrifuge
1,500,000 1,500,000 2
Coin validator
2,000,000 2,000,000 1
Sorting spiral
2,000,000 2,000,000 1
* MCBIF = Mean Cycle Between Intrinsic Failure
2
1
3
4
5
1
4
2
3
9.3
Interfaces
This section shows the pin assignment for the CLS interfaces to the PC and the power supply unit.
9.3.1
USB port
USB standard B
9.3.1.1
Pinning
Pin Function
Description
1 VCC
+5V
2 D-
Data-
3 D+
Data+
4 GND
Ground
9.3.2
Power connector
• Type:
KPJX-4S-S, socket, shielded
• Manufacturer: Kycon
9.3.2.1
Pinning
Pin Function
1 24 V DC
2 GND
3 GND
4 24 V DC
5 Chassis ground