![background image](http://html1.mh-extra.com/html/cpi/cls-advance/cls-advance_operators-manual_2675010041.webp)
OM_CLS_-_EN_2-0
41
CLS
Advance
Technical characteristics
9
Technical characteristics
This chapter contains
• all relevant CLS data
• details of the power and PC interface
• reliability figures
• power supply requirements
• installation & service dimensions
• notes on environmental protection
9.1
Device data
Supply voltage
24 V DC ±5%
Power supply
Input: 100–240 V AC
Output: 24 V DC ±10%
Current consumption
Stand-by mode: 600 mA
Operating mode:
3 A
Max.:
5 A
Max. peak current: 8 A
Inrush current:
8 A
Make sure the CLS is powered using an appropriate power supply guaranteeing
the CLS is grounded to the mains
(cf. Chap. "9.4 Power supply requirements", p. 43)
.
If not, the CLS is not protected against electromagnetic interferences and
damage, and proper operation cannot be ensured.
Regulations for grounding systems vary considerably among countries. Please
consider all relevant and applicable local regulations and directives.
Temperature range
Operation: 5 °C to 55 °C
Transport: -25 °C to 60 °C
Storage:
5 °C to 40 °C
Cold start:
0 °C
Temperature change
Max. 0.2 °C/min
Rel. humidity
Operation: 5–85%
Transport: 15–98%
Storage: -15–98% (in original packaging)
5–85% (unpacked)
Condensation
Not permitted
Mechanical environmental conditions
Class Comment
Operation
3M2
Building without strong vibration
Transport
(in original packaging)
2M2
Any truck and trailer or carriage by rail/air
Storage
(in original packaging)
1M3
Sensible vibrations & shocks due to machines
or passing vehicles
Noise emission [ISO 7779:2010]
Idle mode [bystander position]
29 dB
[ISO 9296:1988-04]
Operating mode [bystander position]
Average noise level during one operation cycle: 50 dB
Max. noise level during operation with coins:
79 dB
Max. noise level during operation without coins: 72 dB
Interfaces
Power:
For 24V-power supply unit permanently supplying at least 5 A
PC:
USB standard B
For pin assignment refer to
Coin input capacity
Up to 50
€
1-sized mixed coins at once
Coin acceptance
Capacity to validate:
up to 24 different coin denominations
Capacity to sort:
up to 8 coin denominations, depending on sorting spiral and hoppers
installed
Capacity to process:
up to 50 coins at once
Diameter:
depends on sorting spiral installed,
EUR configuration: 16.25–25.75 mm
Max coin diameter 32.5mm
Thickness:
min. coin thickness 1.3mm, max. coin thickness 3.3mm
Speed: 10 coins/s max., acceptance of first coin in less than 2 s
Rate (first insertion): at least 95% with bulk insertions of 50 coins max.
Coin payout
Capacity to collect:
up to 8 coin denominations in up to 8 single hoppers
approx. 335
€
1-sized coins/single hopper, larger double and triple hoppers
available
For all relevant full and max. numbers of coins please refer to
Payout configuration & capacity", p. 16
Speed:
6 coins/s max.
Capacity to payout:
Return tray capacity of 50
€
1-sized coins