OM_CLS_-_EN_2-0
35
CLS
Advance
Service
8.3
Removing and reinserting funnel insert
Cleaning the coin input funnel requires the input funnel insert to be removed:
1
Open the CLS lid
(cf. Chap. "7.2 Opening and closing the CLS lid", p. 26)
.
2
Carefully fold down the dust tray and clean it if necessary
(cf. Chap. "8.4.2 Emptying the dust tray",
3
Carefully put the slotted screw driver through the bottom center hole of the input funnel, pry
funnel insert loose
] and remove it upwards
].
4
Close dust tray
(cf. Chap. "8.4.2 Emptying the dust tray", p. 37)
and lid
(cf. Chap. "7.2 Opening and closing
again.
For reinsertion of the funnel insert:
5
Insert funnel insert by its two snap-in latches into the input funnel's outer holes of the center
row
A
] and press insert down into the input funnel for tight fit of the insert
B
].
Lid
Fig. 42:
Loosening and removing funnel insert
A
B
Fig. 43:
Reinserting funnel insert
A
B