00 | Page 52
www.covvi.com | Unit 4, Quayside Business Park, Leeds, LS10 1DJ | 020 3949 9500
11.0 The COVVI Power Supply
11.10 System Compatibility
The COVVI Power Supply is compatible with all 7.4V nominal powered upper limb systems and can deliver a
peak current of 5.0A. The system should only be used with COVVI batteries and the wall charger provided.
Using generic USB-C cables may affect the ability to charge or charge times. Any modification to the COVVI
Power Supply can cause injury or death.
WARNING:
Use of accessories, transducers, and cables other than those specified or provided by COVVI Ltd.
could result in increased electromagnetic emissions or decreased electromagnetic immunity of the COVVI
Power Supply and result in improper operation.
11.11 Battery Replacement
As with all batteries the capacity will degrade overtime, we expect this to become noticeable after 12 months
of use. The COVVI Power Supply will support 300 charge and discharge cycles. After this, the time it takes to
fully flatten the batteries will become shorter. Replacement cells are available for the COVVI Power Supply,
but both batteries must be changed at the same time. There are two versions of spare batteries depending
on which version of the Power Supply you ordered.
It is imperative that you replace the cells with those of the same capacity, COVSB-1600 is only compatible with
the 1600mAh Power Supply and COVSB-2600 is only compatible with the 2600mAh Power Supply. Deplete
the old batteries until flat and the limb no longer moves. Then disassemble the limb and replace the cells.
Reassemble the limb, connect the batteries to the USB-C charger and allow them to fully charge. If this initial
charge is not conducted properly it can negatively affect how the system calculates the remaining charge.
Check your local waste regulations to safely dispose of your old batteries.
Summary of Contents for AK140E316
Page 2: ...Anything Is Possible...
