COVANA OASIS, Installation Manual

Page: 21 / 62

INSTALLATION MANUAL INSTALLATION 21
20) Use the Robertson screwdriver to unscrew the
three #8-10 x 1½
″ screws holding both side
panels to the bottom of the crate. (Figure 38)
CAUTION

Remove side panels with care. The side panels
could fall on the COVANA cover.
21) Pivot the side panels by gently prying them
outward; lay the panels down on the ground.
There is one panel per side. (Figure 39)
CAUTION

Do not remove the side panels completely, doing
so may damage the cover.
22) Pull the bottom section out, making sure that it
does not interfere with the cover. If it does,
gently lift the cover near the bottom section and
continue pulling it out. (Figure 40)
CAUTION

Do not flip the bottom section, this might scratch
the COVANA cover if the nails are protruding from
the wood. Pulling the bottom section is the best
method to ensure no aesthetic damage.

Flatten any protruding nails.
Bottom section
Pulling direction
Lift cover corners
before pulling out
bottom section
Pivot point
Figure 38
Figure 39
Figure 40