CORRECT CRAFT 2014 210 Owenrs Manual Download Page 81

Page: 81 / 292

1-69

Fallen skier or rider:

Falling and injuries are common in skiing or

riding.

• Circle a fallen skier/rider slowly to return the tow rope

handle or pick up the fallen skier/rider.

• Turn off the engine when near a fallen skier/rider.
• Always keep the fallen skier/rider in view and on the driver’s

side of the watercraft.

• Display a red or orange skier-down flag to alert other vessels

that a skier/rider is down if required by the state in which
you are operating.

The Warnings and practices in the Watersports Safety Code

represent common risks encountered by users. The code does not

cover all instances of risk or danger. Please use common sense

and good judgment.

Boating Safety

V-Drive Sec 1_2014_Nautique Ski Sec 1.qxd 9/4/13 2:44 PM Page 1-69

Summary of Contents for 2014 210





































































































































































































































































































Search results

Summary of Contents for 2014 210

Reviews:

Brands by name

Popular brands

CORRECT CRAFT 2014 210, Owenrs Manual

Search results

Summary of Contents for 2014 210

Reviews:

Brands by name

Popular brands