manualshive.com logo in svg

CORRECT CRAFT 2014 210, Owenrs Manual

Share
Download
CORRECT CRAFT 2014 210 Owenrs Manual Download Page 165

3-57

Controls and Indicators

Nautique LINC 2.0 with NCRS

HOME menu for LINC with NCRS

The primary difference with this Homescreen from the standard
version of LINC is that it displays NCRS (Nautique Configurable
Running Surface) related settings to the right of the speedometer.

The order of the soft keys has changed slightly from the standard
version of LINC; the third, fourth, and fifth soft keys down are now
Speed Setting Up, Speed Setting Down, and Speed Control On/Off
(in that order).

The seventh button still displays the second menu of soft keys, but
is now labeled “NCRS.”

USER

V-Drive Sec 3_2014_Naut Air Sec 4.qxd  9/5/13  9:11 AM  Page 3-57

Summary of Contents for 2014 210





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands