manualshive.com logo in svg

CORRECT CRAFT 2014 210, Owenrs Manual

Share
Download
CORRECT CRAFT 2014 210 Owenrs Manual Download Page 219

5-3

Gasoline Containing Alcohol

The implementation of ethanol-based fuel is spreading rapidly
throughout the United States. As such, PCM Engines and Nautique
provide the following information regarding the use of this fuel.
This information addresses the use of ethanol fuels in PCM Engines
and Nautique boats.

If ethanol blended fuel rated E10 or less is used, or if the presence
of alcohol is uncertain, inspections and service of the complete fuel
system are required more frequently. Any sign of fuel leakage or
deterioration must be repaired immediately before further engine
operation. It is also important to know that ethanol blended fuel
will act as a solvent and will attract and hold moisture.

Fuel system or engine damage caused by contamination from
water, foreign particles, sludge, or gums entering or forming in the
fuel system is not covered by the engine’s limited warranty.

Getting Underway

DO

 

NOT use any gasoline that contains

METHANOL. This fuel is very corrosive and will create
unsafe operating conditions to the boat’s fuel system
and serious damage to the engine. Any engine damage
caused by the use of methanol will not be covered by
the engine’s warranty.

CAUTION

Use of ethanol blended fuel rated E10 or

less is acceptable. DO

 

NOT use fuels rated higher than

E10. Ethanol fuels rated higher than E10 could
potentially damage the engine and/or present an unsafe
boat fuel system. Damage to the engine resulting from
the use of ethanol fuel rated higher than E10 IS

 

NOT

covered by the engine’s warranty.

CAUTION

V-Drive Sec 5_2014.qxp_Naut Air Sec 6.qxd  9/5/13  9:24 AM  Page 5-3

Summary of Contents for 2014 210





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands