manualshive.com logo in svg

CORRECT CRAFT 2014 210, Owenrs Manual

Share
Download
CORRECT CRAFT 2014 210 Owenrs Manual Download Page 62

1-50

Lights, bells and horns are used on buoys for night or poor visibility
conditions. Buoys with unique light flashing characteristics are
identified on nautical charts with the specific flashing pattern.

Types of Buoys

There are several types and shapes of buoys. Buoys may be
unlighted, lighted, with sound or may have both an audible and a
visual signal. Lights, bells and horns are used on buoys for night or
poor visibility conditions. Different shapes of buoys are shown
below.

Buoys with unique light flashing characteristics are identified on
nautical charts with the specific flashing pattern. 

Section 1

Unlighted Bell Buoy

Spar Buoy

Nun Buoy

Lighted Buoy

Can Buoy

FWMS Marking System

V-Drive Sec 1_2014_Nautique Ski Sec 1.qxd  9/4/13  2:44 PM  Page 1-50

Summary of Contents for 2014 210





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands