manualshive.com logo in svg

CORRECT CRAFT 2014 210, Owenrs Manual

Share
Download
CORRECT CRAFT 2014 210 Owenrs Manual Download Page 218

5-2

Section 5

Safety Equipment

Federal and local laws require certain safety equipment to be on-
board at all times. In addition, responsible boaters carry other
equipment in case of emergency. Check with local boating
authorities for any additional requirements over and above the
federal requirements.

Fueling

Take care not to spill gasoline. If gasoline is accidentally spilled,
wipe up all traces of it with dry rags and immediately dispose of the
rags properly ashore. Spilled fuel may “yellow” the gelcoat finish
and damage gunwale trim.

To prevent engine damage not covered by

warranty, refer to your engine operation and
maintenance manual for recommended fuel type and
octane rating.

CAUTION

Explosion or fire hazard. Gasoline is

extremely flammable and highly explosive under certain
conditions.  Turn the engine OFF

 

and DO NOT smoke or

allow open flames or sparks within 50 feet (15 meters) of
the fueling area. Check your boat for fuel leaks and
fumes before, during and after each use. Maintain
contact between the fuel nozzle and the fuel tank to
prevent electrostatic spark. DO NOT use a plastic
funnel.

V-Drive Sec 5_2014.qxp_Naut Air Sec 6.qxd  9/5/13  9:24 AM  Page 5-2

Summary of Contents for 2014 210





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands