manualshive.com logo in svg

CORRECT CRAFT 2014 210, Owenrs Manual

Share
Download
CORRECT CRAFT 2014 210 Owenrs Manual Download Page 248

7-8

Section 7

Salt Water Boating 

If you use your boat in salt water or other unusual water
conditions, fresh water flush your engine and cooling system with
freshwater.

Nautique offers an optional freshwater flush kit. This is the only
system we recommend if you use your boat in salt water or unusual
water conditions. Flushing the system by running the boat in fresh
water is another good way to flush the engine, but it must be done
immediately. 

Freshwater Flushing Kit -

Optional

The optional freshwater flushing kit allows you to flush the water
system after your boat is operated in salt water, brackish water or
unusual water conditions.

We recommend using this system if you use your boat in salt water
or unusual water conditions. Flushing the system by running the
boat in fresh water is another good way to flush the engine, but it
must be done immediately.

DO NOT connect the flushing kit to a water source which exceeds
normal municipality water pressure.

Proper Use of Freshwater Flushing Kit

1. Open the ball valve located between the system’s deck fitting

and main engine cooling water supply hose. 

2. Make sure that the ball valve located in the main cooling system

supply hose is open. This valve is located near the hull inlet
fitting.

3. Open the cap of the system deck fitting and properly connect a

water supply hose, making sure the connection is secure.

4. Turn on the hose and start the engine.
5. Close the ball valve of step 2 unless the boat is on a trailer or

lifted up in the air, in which case it should be left open.

V-Drive Sec 7_2014_Naut Air Sec 8.qxd  9/5/13  9:25 AM  Page 7-8

Summary of Contents for 2014 210





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands