CORRECT CRAFT 2014 210 Owenrs Manual Download Page 188

Page: 188 / 292

3-80

Driver’s Seat Adjustment

The driver’s seat can be adjusted fore and aft and rotates side-to-
side.

To slide seat, pull the lever

(A)

forward, slide into position, and

release the lever to secure in locked position.

To rotate seat, push down on the lever

(B)

and rotate seat to the

desired position. Release lever to lock the seat in position.

210, 230, G23 and G25

CORC0440

Section 3

A seat or seats which are not locked in

position can cause death or serious injury. Lock the
seat(s) in position (fore and aft) before operating the
boat.

V-Drive Sec 3_2014_Naut Air Sec 4.qxd 9/5/13 9:11 AM Page 3-80

Summary of Contents for 2014 210





































































































































































































































































































Search results

Summary of Contents for 2014 210

Reviews:

Brands by name

Popular brands

CORRECT CRAFT 2014 210, Owenrs Manual

Search results

Summary of Contents for 2014 210

Reviews:

Brands by name

Popular brands