manualshive.com logo in svg

CORRECT CRAFT 2014 210, Owenrs Manual

Share
Download
CORRECT CRAFT 2014 210 Owenrs Manual Download Page 222

5-6

Section 5

Pre-Operation Checks

It is the owner’s responsibility to check all of the items listed below
to be certain all preparation steps are completed before you use
your boat. Checking these items periodically will soon become a
habit. If leaks or other abnormal conditions are found, stop using
the boat and contact your Nautique dealer to have the problem
corrected.

Get into the habit of performing these checks in the same order
each time so that it becomes routine.

•  Make sure to check all safety items.
•  Check that drain plug is properly installed.
•  Check condition of propeller.
•  Check that all batteries are fully charged and at the proper

level.

•  Verify the amount of fuel in the fuel tanks.
•  Be sure the lights, horn, bilge pumps and other electrical

equipment are in operating condition.

•  Check that steering system operates properly.
•  Make sure your float plan is submitted to a responsible

person.

•  Refer to your engine operation and maintenance manual for

additional pre-operation checks.

V-Drive Sec 5_2014.qxp_Naut Air Sec 6.qxd  9/5/13  9:24 AM  Page 5-6

Summary of Contents for 2014 210





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands