CORRECT CRAFT 2014 210, Owenrs Manual

Page: 275 / 292

G-1
Glossary
ABYC – American Boat and Yacht Council, Inc.
AFLOAT – On the water.
AFT
– Toward the rear or stern of the boat.
AGROUND – Touching bottom.
AMIDSHIP
– Center or middle of the boat.
ANCHOR – (1) An iron casting shaped to grip the lake bottom to
hold the boat. (2) The act of setting the anchor.
ANODE – An electrode carrying a positive charge.
ASHORE – On the shore.
ASTERN – Toward the stern.
BAIL – To remove water from the bottom of the boat with a pump,
bucket, sponge, etc.
BALLAST – Any solid or liquid weight placed in a boat to increase
the draft, to change the trim.
BEAM
– The widest point on the boat.
BEARING – Relative position or direction of an object from the boat.
BILGE
– The lowest interior section of the boat hull.
BOARDING – To enter the boat.
BOUNDARY WATERS
– A body of water between two areas of
jurisdiction; i.e., a river between two states.
BOW – The forward end of the boat.
BULKHEAD – Vertical partition (wall) in a boat.
BUNKS – Carpeted trailer hull supports.
BURDENED BOAT – Term for the boat that must "give-way" to boats
with the right-of-way.
CAPACITY PLATE – A plate that provides maximum weight capacity
and engine horsepower rating information. It is located in full view
of the helm.
CAPSIZE – To turn over.
V-Drive Gloss_2014.qxp_Naut Air Gloss.qxd 9/5/13 9:22 AM Page G-1