Page 11
3 Megapixel IP Camera User Manual
Resolution
: The higher the resolution is, the clearer the image is.
Frame rate
: The higher the frame rate is, the more fluency the video is. However, more
storage room will be taken up.
Bitrate type
: Including CBR and VBR. CBR means that no matter how changeable the video
resources are, the compression bitrate keeps constant. This will not only facilitate the image
quality better in a constant bitrate but also help to calculate the capacity of the recording.
VBR means that the compression bitrate can be adjustable according to the change of the
video resources. This will help to optimize the network bandwidth.
Video Quality
: When VBR is selected, you need to choose image quality. The higher the
image quality you choose, the more bitrate will be required.
Bitrate
: Please choose it according to the actual network situation.
I Frame interval
: It is recommended to use the default value. If the value is over high, the
read speed of the group of pictures will be slow resulting in the quality loss of the video.
Video encoding profile
: Baseline, main and high profile are optional. Baseline profile is
mainly used in interactive application with low complexity and delay. Main/high profile is
mainly used for higher coding requirement.
Alarm picture size
: Please select it according to the actual situation.
Video encode slice split
: If enabled, you may get more fluency image even though using the
low-performance PC.
4.2.3
OSD Configuration
Go to “Video Config”
“OSD Config” menu to display the interface as shown below.
You may set time stamp, device name and custom OSD here. Drag the time stamp and custom
OSD to set their position. Then press the “Save” button to save the settings.
