Page 13
3 Megapixel IP Camera User Manual
2. Check “Enable” and then click “Draw” button.
3. Drag the mouse to set the ROI area.
4. Set the level.
5. Click “Save” button to save the settings.
Now, you will see the selected ROI area is clearer than other areas especially in low bitrate
condition.
4.3
Alarm Configuration
Alarm configuration includes three submenus: Motion Detection Area, Motion Detection
Trigger and Motion Detection Schedule.
4.3.1
Motion Detection Area
1.
Go to “Alarm configuration”
“Motion Detection Area” to see an interface as shown
below.
2. Move the “Sensitivity” scroll bar to set up the motion trace sensitivity.
3. Check “Add”, press the “Ctrl” button and move mouse to select the motion detection area;
Select “Erase” and move the mouse to clear all motion detection area.
