Page 22
3 Megapixel IP Camera User Manual
Delete user:
1. Select the user you want to delete in the user configuration list box.
2. Click “Delete” button to pop up a confirm dialog box. Then click “OK” to delete the user.
Note:
The default super administrator cannot be deleted.
4.5.2
Security Configuration
1. Go to Advanced Configuration
Security Configuration to see a tab shown below.
2. Check “Enable IP address” check box, select “Deny the following IP address”, input IP
address in the IP address list box and click “Add” button. Then this IP address will display in
the list box; the operation step of “Allow the following IP address” is the same as that of
“Deny the following IP address”.
3. Select the IP address you want to delete from the IP address list box and click “Delete”
button to delete that IP address.
4. Check “Enable MAC address” check box, select “Deny the following IP address”, input
MAC address in the MAC address list box and click “Add” button. Then this MAC address
will display in the list box; the operation step of “Allow the following MAC address” is the
same as that of “Deny the following IP address”.
5. Select the MAC address you want to delete from the MAC address list box and click
“Delete” button to delete that MAC address.
6. Click “Save” button to save the above setting.
Parameter
Meaning
User Name
User name to operate the logon client end
User Type
Type of users, normal user, advanced user and super administrator
Binding MAC address
The MAC addresses of user access the server which should set up
according to actual MAC address of server.
Password
Password to log in the client terminal
Confirm Password
Password to log in the client terminal
