Page 14
3 Megapixel IP Camera User Manual
4. Press the “Save” button to save the settings.
4.3.2
Motion Detection Trigger
1. Go to “Alarm Configuration”
“Motion Detection Trigger” to display an interface as
shown below.
2. Check “Enable alarm” check box. Then all functions under this interface will be activated.
3. Trigger Email: Check “Attach picture” and select email addresses in the “Receival email
address” text box (Email address shall be set first in the Mail config interface). Then the
triggered snap pictures will be sent into those addresses. User can also define the subject and
content of the email.
4. Trigger FTP: Check “Uploading picture”. Then the triggered snap pictures will be sent into
FTP server address.
Note: Please refer to FTP configuration chapter for more details.
