Page 15
3 Megapixel IP Camera User Manual
6. Press the “Save” button to save the settings.
4.3.3
Motion Detection Schedule
Go to “Alarm configuration”
“Motion Detection schedule” interface as shown below.
Week schedule
User could set the alarm time from Monday to Sunday for alarm everyday in one week.
Note: The lengthwise means one day of a week; the rank means 24 hours of a day. Click on
the pane to set the alarm hours. Green means selected area. Blank means unselected area.
Add: Add the schedule for a special day.
Erase: Delete holiday schedule.
Day schedule
User could set alarm time for alarm at a certain time of special day, such as holiday.
1. Select a date at the “Date” pull down list, press “Add” button to add that date to the list box
on the right side and then move the scroll bar to set the schedule of that day.
2. Select a date in the list box on the right side, and press “Erase” to remove the schedule on
that day.
Press the “Save” button to save the settings.
Note: Holiday schedule is prior to Week schedule.
4.4
Network Configuration
Network configuration includes eight submenus: Port, IP Address, Server Configuration, IP
Notify, DDNS Config, RTSP, UPnP, Mail Setting and FTP.
4.4.1
Port
1. Go to “Network config”
“Port” to see the interface as shown below.
