CONVEY-ALL 2245-TL, Operator'S Manual

Page: 45 / 58

Operator’s Manual: 2200-TL Series Conveyor
10.2015 4-11
Fig 71 - CAT Engine
Fig 72 - Oil Filter
4.3.4 Change Engine Oil and Filter:
1. Review the Operator’s Manual for the engine.
WARNING: Rotating Part Hazard
Turn off engine. Lock out power and wait
for belts to stop moving.
DANGER: Hot Components
Allow the engine to cool before changing
the oil. Hot oil can cause burns if it contacts
exposed skin.
Note:
It is best to change oil while engine is warm
to keep contaminants in suspension.
2. Place a pan under the drain plug.
3. Remove the drain and allow the oil to drain for
10 minutes.
4. Install and tighten the drain plug.
5. Remove engine oil filter.
6. Dispose of the used oil in approved container.
7. Apply light coat of oil to the O-ring of new
filter and install. Snug up by hand, then tighten
another half turn.
8. Fill crankcase with specified oil.
9. Run the engine for 1-2 minutes and check for oil
leaks.
10. If leaks are found, tighten drain plug slightly.
11. Check engine oil level. Top up as required.