CONVEY-ALL 2245-TL, Operator'S Manual

Page: 15 / 58

Operator’s Manual: 2200-TL Series Conveyor
Revised 06.2016 2-7
• Do not operate machine when any guards are
removed.
• Chock wheels of conveyor before starting.
• Be sure that conveyor tube is empty before raising
or lowering.
• Close valves in hydraulic line when machine is in
position or before transporting.
2.11 LOCK-OUT TAG-OUT SAFETY
• Establish a formal Lock-Out Tag-Out program for
your operation.
• Train all operators and service personnel before
allowing them to work around the area.
• Provide tags on the machine and a sign-up sheet
to record tag out details.
2.10 OPERATING SAFETY
• Be sure that anyone who will be
operating the conveyor, or working
around the unit, reads the manual. They
must know the operating, maintenance
and safety information.
Review the manual annually.
• Clean or replace all safety decals if they cannot be
clearly read and understood.
• Place all controls in neutral, and stop the engine.
Remove the ignition key. Wait for all moving parts
to stop before adjusting, repairing or unplugging.
• Keep all bystanders, especially children, away from
the machine when running.
Also, when authorized personnel are carrying out
maintenance work.
• Establish a Lock-Out, Tag-Out policy for the work
site. Be sure all personnel are trained in and follow
all procedures.
Lock-out and tag-out all power sources before
servicing the unit or working around equipment.
• Be familiar with machine hazard area. If anyone
enters hazard areas, shut down machine
immediately. Clear the area before restarting.
• Keep hands, feet, hair and clothing away
from all moving and/or rotating parts.
• Do not allow riders on the conveyor when moving
or transporting.
• Keep working area clean and free of
debris to prevent slipping or tripping.
• Stay away from overhead obstructions
and power lines during operation and
transporting. Electrocution can occur
without direct contact.