CONVEY-ALL 1685-SP, Operator'S Manual

Page: 24 / 64

Operator’s Manual: 1600-SP Series Conveyor
3-6 Revised 06.2019
NOTICE: Equipment Damage Likely
Always disengage both drive wheels before
towing. Hydraulic motors will be damage if
driven at highway speeds.
Drive Wheels:
The hydraulically driven wheels have a lever to
manually engage or disengage the drive mechanism.
When disengaged, insert the retaining clip to secure.
IMPORTANT:
As a default, for better maneuverability,
engage one drive wheel. Only engage both wheels
when driving conditions require.
Drive Box and the Hydraulic Motor:
The conveyor belt winds through the Positive Pinch
Drive Box, and is driven by hydraulics.
Hopper Steering Wheels:
The wheels at the hopper turn the unit. Use the
specified lever on the hydraulic valve bank to operate.
Hydraulic cylinders raise and lower the wheels.
Check valves lock the wheels, when they are raised.
IMPORTANT:
Do not extend the wheel cylinders fully.
Raising the hopper too high
may cause it to upend.
Standard Collapsible Hopper:
Hoppers are designed with spring loaded hopper
frames. This will allow the truck box to push the
hopper edge down.
All hoppers have rubber flashing to seal the junction
between the belt and the sides of the hopper.
Fig 15 - Driver’s side drive wheel
Fig 16 - Drive box with hydraulic motor
Fig 17 - Steering wheels
3613000006
Fig 18 - Standard collapsible hopper