CONVEY-ALL 1685-SP, Operator'S Manual

Page: 36 / 64

Operator’s Manual: 1600-SP Series Conveyor
3-18 Revised 06.2019
Fig 56 - Chocked wheels
9. Use the hydraulics to raise the main conveyor
tube to working height.
10. Advance until the conveyor is in position:
- the discharge spout is above the storage bin.
and/or
- the hopper is in position for unloading.
IMPORTANT:
To prevent damage to
the conveyor tube and belt,
be sure it does not rest on any structure.
NOTICE: Upending Hazard
Always check the weight of the hopper end to
prevent upending.
11. Stake or weigh down the hopper end to prevent
upending when the machine is emptying.
12. Close hydraulic ball valve, to lock the conveyor
tube in position.
13. Chock the drive wheels.
14. If equipped with swing-out conveyor:
Now, the swing-out conveyor may be rotated
around the main conveyor and into position.
IMPORTANT:
When removing the conveyor from a work location,
move the swing-out conveyor to directly in front
of the main tube. Then, drive the main conveyor
straight back from the bin,
the swing-out will be pushed ahead.
Lower the conveyor completely,
then store the swing-out.
Fig 54 - Working height
Fig 55 - Hydraulic ball valve to tube lift cylinder