CONVEY-ALL 1685-SP, Operator'S Manual

Page: 23 / 64

Operator’s Manual: 1600-SP Series Conveyor
Revised 06.2019 3-5
Fig 11 - Hydraulic Filter and Hydraulic Cooler
Hydraulic Oil Cooler:
The cooler is standard feature to keep down the
operational temperature of the oil.
Hydraulic Controls:
The hydraulic valve bank is beside the engine. There
are two gauges on the valve bank, to monitor the two
separate circuits.
a. Mover Kit Lever:
This 4 position, spring-loaded lever controls
the movement of the conveyor. It drives the
wheels forward and reverse, and also swivels the
steering wheels for turning left or right.
b. Conveyor Lift:
This lever raises and lowers the conveyor tube.
c. Hopper Lift:
This lever controls the height of the steering
wheels, which in turn moves the hopper.
- Lower the wheels, to raise the hopper when
driving the unit.
- Raise the wheels, lowering the hopper into
position for unloading.
d. Conveyor Belt Control:
The hydraulic motor controlling the conveyor belt
is turned on and off with this lever.
Note:
If the unit includes a swing-out conveyor,
both belts will be controlled with this lever.
b
c a
d
Fig 12 - Hydraulic levers
Fig 13 - Hydraulic pressure gauges
Fig 14 - Hydraulic ball valve to the lift cylinder
Hydraulic Ball Valve to Conveyor Lift Cylinder:
This valve allows oil into, or out of, the hydraulic
cylinder which raises/lowers the tube.
IMPORTANT:
Open the ball valve to raise/lower the conveyor.
The valve must be closed fully when conveyor
is to remain in fixed position.
This is to prevent the ram from creeping
downward during operation.