CONVEY-ALL 1685-SP, Operator'S Manual

Page: 42 / 64

Operator’s Manual: 1600-SP Series Conveyor
4-2 Revised 06.2019
Fig 62 - Diesel engine
3622000001
Storing Lubricants:
Your machine can operate at top efficiency only if
clean lubricants are used. Use clean containers to
handle all lubricants. Store them in an area protected
from dust, moisture and other contaminants.
4.1.1 Greasing:
Use the Service Record provided on page 4-15, to
keep a record of all scheduled maintenance.
1. Use a hand-held grease gun for all greasing.
2. Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
3. All bearings are sealed and greasable. They
require minimal grease.
Recommended greasing is 1 small stroke every
2 weeks. Be careful not to over grease as this
may push the seal out.
4. Replace and repair broken fittings immediately.
5. If fittings will not take grease, remove and clean
thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.