CONVEY-ALL 1635-FL, Operator'S Manual

Page: 28 / 60

3-8 08.2020
Operator’s Manual: 1600-FL Series Conveyor
3.5 ATTACHING TO TOW VEHICLE
ELECTROCUTION HAZARD
Ensure enough clearance from overhead
obstructions, power lines or other equipment.
1. Clear the working area of bystanders,
especially small children.
2. If the conveyor is in a working position:
- Move the conveyor away from the bin and
out of the work area.
- Lower the tube to it’s collapsed position.
3. Ensure that there is sufficient room and
clearance to back up to the conveyor.
4. Install the hitch with the anchor pin. Place
the retainer before using hitch.
5. Align the tow vehicle’s drawbar with the
hitch of the conveyor while backing up.
6. Set park brake before dismounting tow vehicle.
7. Install the pin with its retainer clip, to connect
the tow vehicle.
- Secure the safety chain.
8. Remove and store the jack.
Fig 24 - Hitch
Fig 25 - Attached to tow vehicle