CONVEY-ALL 1635-FL, Operator'S Manual

Page: 38 / 60

4-4 08.2020
Operator’s Manual: 1600-FL Series Conveyor
Fig 34 - Gas engine drive
Fig 35 - Alligator® lacing
Fig 36 - S-Drive drive box
Gas Engine Units:
3. Check fuel level.
- Add as required.
4. Check engine oil level.
- Add if required
5. Clean the air filter.
6. Grease countershaft bearing, if equipped.
All Conveyors:
7. Inspect conveyor belt lacing for wear.
8. Check the conveyor belt tension daily while
breaking-in the conveyor.
- Refer to Section 4.2.3
9. Check the conveyor belt alignment frequently
during the first 10 hours of operation until it
seats itself. Refer to Section 4.2.3
10. Inspect all rollers and bearings for play and
wear.
- Replace if necessary.