Gsm Advanced Manual - 11
11
11
11
4. LOCAL CONTROL
Advanced configuration, local control, tracing and other features are available through serial
communication link. RJ45 8 pin com port is located under the front cover.
Link cable 1013.00.02 is available from local resellers.
Although GsmSuite can give a more powerful control, a command line interface is anyway
available using a terminal emulation program.
RS-232 settings : (DCE) 300 ... 115200 bit/s
8 data bits, 1 stop bits, 1 parity bit
Hardware
handshake
4.1 Initialization
During the start-up procedure, after a power on, some information are issued to local com port.
SIM: READY
Once the SIM card has been detected, open and loaded.
Software Version: COMFORT 00.06
IMEI: 012345678901234
Serial Number 506030460468453
Production Date (W/Y): 03/2006
Firmware Version 655_09gg.Q2406B 2015268 111705 17:01
Hardware Version 4.53
Once the initialization has been completed successfully.
13/03/15,15:16:03 gsm ok I TIM
Once the network registration has been performed successfully.
13/03/15,15:16:06 gprs ok
Once the GPRS service has been detected as available (GPRS types only).
13/03/15,15:16:17 received sms
31/03/06,10:07:35 time sync
Once the real time clock autosync has been performed successfully (if device info provided).
4.1.1 SIM ERROR
When the SIM card is protected and a mismatch PIN occur the unit doesn’t complete the
initialization, waiting for the correct PIN to be entered:
001: PIN error: enter PIN [AT+CPIN=”XXXX”].
Remember to update Index 297.
If a wrong PIN is entered 3 times, the SIM card will ask for the PUK (Personal Unblocking Key):
002: SIM card locked: enter [AT+CPIN=”PUK”,”NEWPIN”].
Remember to update Index 297.
The new PIN must be assigned when PUK is provided.
Remember to update the PIN code stored at index 297: this is the PIN code used to open the
SIM card at power-on when the SIM card PIN was enabled.
