background image

 

Gsm Advanced Manual - 19

19

19

19

7.2 Add Supervisors 

 

Up to 100 supervisors can be stored into the device Phonebook by means of GsmSuite 
programming software. Any supervisor can also add supervisors issuing an SMS: 

 

 +7,INDEX,TEL,NAME,,,,,EMAIL 

 

 

7.2.1 INDEX 

The position assigned inside the internal phonebook, starting from index 401 up to 500. 
Omitting index, the supervisor will be stored at first available position. 
 

7.2.2 TEL 

The telephone number that will be recognized. Number should be stored in international format 
(including Country code). Up to 20 characters available.  
 

 

7.2.3 NAME 

The name of the supervisor to be stored. Up to 14 characters available.  

 
7.2.4 EMAIL 

The optional Email address of the supervisor. Up to 40 characters available. 
GPRS devices can send some Email messages to specified address.  

 

7.2.5 Example 

 

+7,405,+4485854300,Hermione,[email protected] 

Store Hermione into supervisor’s group at position 405. 
 

7.2.6 Confirmation 

Once Phonebook edit has been successfully done, device will send back an SMS specifying 
assigned index, name and 7 markers to specify which fields are defined (

*

) and which don’t (

-

): 

405,Hermione,*----*- 

 

Summary of Contents for GsmComfort+





















































Reviews: