Gsm Advanced Manual - 20
20
20
20
8. RECIPIENTS
It’s possible to define specific recipients for each local event.
Recipients can receive alerts in many different formats. It’s possible to set one or more different
format to be sent at same time when the specific event occurs.
8.1 Add Recipients
Up to 100 recipients can be stored into the device Phonebook by means of GsmSuite
programming software. Any supervisor can also add recipients issuing an SMS:
+9,INDEX,RING,NAME,SMS,EVENT,FAX,XSMS,EMAIL,TEXT
8.1.1 INDEX
The position assigned inside the internal phonebook, starting from index 301 up to 400.
Omitting index, the recipient will be stored at first available position.
8.1.2 RING
The telephone number that will receive a simple call when the specified event occurs.
Number should be stored in international format (including Country code).
Up to 20 characters available.
8.1.3 NAME
The name of the recipient to be stored. Up to 14 characters available.
8.1.4 SMS
The telephone number that will receive an SMS when the specified event occur.
Text of this SMS is specified in the field
TEXT
.
Number should be stored in international format (including Country code).
Up to 20 characters available.
8.1.5 EVENT
The numeric code associated with specific event:
00 blackout
alert will be sent at power failure (if backup battery is provided)
01
probe temperature < B threshold
alert will be sent when measured temperature is falling below specified threshold B
(group 5 index 281)
02
AuxI closing
alert will be sent at aux input closing (group 5 index 282)
10 power
good
alert will be sent when main power supply is back following a blackout
11
probe temperature > A threshold
alert will be sent when measured temperature is rising above specified threshold A
(group 5 index 281)
12 AuxI
opening
alert will be sent at aux input opening (group 5 index 282)
20 regulation
malfunction
Alert will be sent if the setpoint isn’t reached within the specified time
(group 6 index 289)
30 remote
tracing
a log SMS will be sent on every local event, including system event (network
availability, remote editing, message processing…).
This log message will report time and date.
40
temperature probe short circuit
Alert will be sent when probe temp rises up 40°C (or short circuit)
41
missing temperature probe
Alert will be sent when probe temp falls below 1°C (or missing)