Gsm Advanced Manual - 10
10
10
10
3.2.2 SYSTEM CONTROL COMMANDS
The following system commands are available to supervisors only.
Stop
Disable CLIP
Disable free calls control feature (CLIP): incoming calls will be rejected.
Start
Enable CLIP
Enable free calls control feature (CLIP): incoming calls from registered
users will activate outputs following the specified sequence.
Setpoint=tt
Set comfort temperature
Store a new value for the comfort temperature to reach.
Allowed range is 2÷37°C (36÷99°F).
To operate without setpoint (on/ff) tt=0.
Lista#
Last received calls list request (closed by device)
An SMS reporting the list of last
#
(1÷9) received calls, closed by device,
will be sent. The full list will be sent specifying 0.
List can be splitted on several SMS.
Listu#
Last calls list request (closed by caller)
An SMS reporting the list of last
#
(1÷9) received calls, closed by caller,
will be sent. The full list will be sent specifying 0.
List can be splitted on several SMS.
Pbook
Phonebook request
An Email reporting the complete phonebook will be issued to
supervisor’s email address, if any.
Pbook++
Phonebook & configuration request
An Email reporting the complete phonebook and all system settings will be
issued to supervisor’s email address, if any.
