Strobe Output
Strobe
：
external trigger output signals, it's used to control external device like strobes. You can
set Strobe Line Inverter, Strobe Line Duration, Strobe Line Delay and Strobe Line Pre Delay.
Click
“Digital IO Control” set “Line Selector” as output I/O. Enable “Strobe Enabled” to output IO signals,
as shown below:
You can set Strobe Parameters as shown below
：
Strobe Line Inerter
You can set the high/low level of external trigger output signals via
“Line Inverter” as shown
Below.
Strobe Line Duration
You can set Strobe Line Duration as shown below. It's Strobe Duration
，
when camera in exposure
starting, the Strobe immediately output. The Strobe Duration time determined by Strobe Line Duration
value
：
when the Strobe Line Duration value is 0
，
the Strobe Duration time equal to exposure time; when
the Strobe Line Duration value is not 0
，
the Strobe Duration time equal to Strobe Line Duration value.