The Device Properties Shown as Below.
Click the “>” icon ahead of the device name in the Device Properties Bar Are, to expand device attribute
trees. They are Device Control
、
Image Format Control
、
Acquisition Control
、
Digital IO Control
、
Analog
Control
、
LUT Control
、
Transportation Layer Control
、
User Set Control
。
And the brief introduction of these options shown as below
：
Device Control
In this option, you can check device information and modify device name.
Image Format Control
In this option, you can modify the format of pixel, AOI and test module, etc.
Acquisition Control
In this option, you can set the camera's acquisition mode, trigger exposure time, etc.
Digital IO Control
In this option, you can manage different I/O input or output signals.
Analog Control
In this option, you can adjust the camera acquired image simulation signals, including gain, white balance
and gamma correction.
LUT Control
In this option, the camera can perform gray level transmission output according to the search table set
by user, and highlighting the AOI.
Transportation Layer Control
In this option, you can set the camera's transmission protocol parameters.
User Set Control
In this option, you can save or load the adjusted parameters program and set it as default program when
open the iDatum.
Note
：
For different models of camera, the above-mentioned setting steps may be different, please
refer to the actual one you got.