Hardware External Trigger
If set
“Hardware” as “Trigger Source” can switched to hardware external trigger mode.
You can set hardware external input signal parameters as shown below:
Select Trigger Edge
In this state, it can be triggered at rising edge / falling edge of external signal.
Trigger Delay
From camera receiving signal and responding, this period is trigger delay. Its sequence diagram is shown
below.
It can set proper value in
“trigger_delay” and it's range is from 0μs~32000000μs
，
shown as below:
Trigger Debouncer
The external trigger input signal of the camera may have signal bounce that may cause false trigger. Thus,
it is necessary to debouncer the external trigger signal.
You can set Trigger Debouncer parameters via “Line Debouncer Time” in client software.
Its sequence diagram is shown below. The trigger signal will be ignored when Debouncer Time greater than
Trigger Signal Time. Its sequence diagram is shown below.