Image Acquisition and Transmission
The camera has 2 types of trigger mode, including internal trigger mode and external trigger mode.
Internal trigger mode including Continuous Mode and SingleFrame Mode; external mode including
software trigger and hardware trigger. Internal trigger and external trigger can be switched by On/Off
button under Trigger Mode, off refers to the internal trigger mode and On refers to the external trigger
mode.
Internal Trigger Mode
Under the internal trigger mode, user can control the camera continuously output images or output single
image. Click
“Acquisition Control” > “Acquisition Mode” select “Continuous” to continuously output images;
choose
“SingleFrame” to output single image. Shown as below.
External Trigger Signals and Working Mode
The external trigger signals types of trigger camera acquisition can be given by software or external
device. Under external trigger signal mode, the camera output image via following several working
modes: SingleFrame Trigger mode, Burst Trigger mode and Long Exposure Trigger mode.
Software Trigger
For the camera support software trigger mode, when user set software trigger, the client software can
send commands to camera to acquires and transfer images via Gigabit Ethernet.
Set Steps: Click
“Acquisition Control” > “Trigger Mode” choose “on” to enable trigger mode. Select
“Software” as trigger source in “Trigger Source” click “Execute” in “Trigger Software” to send trigger
commands. Shown as below.