39
EN
W415-1398 / C / 06.15.17
Home Construction and Safety Standard, Title 24 CFR, Part 3280, in the United States or the Mobile Home
Standard, CAN/CSA Z240 MH Series, in Canada. This appliance is only for use with the type(s) of gas indicated
on the rating plate.
This Mobile/Manufactured Home Listed appliance comes factory equipped with a means to secure the
appliance. Built in appliances are equipped with 1/4” (6.4mm) diameter holes located in the front left and right
corners of the base. Use appropriate fasteners, inserted through the holes in the base to secure. For free
standing products contact your local authorized dealer / distributor for the appropriate securing kit. For mobile
home installations, the appliance must be fastened in place. It is recommended that the appliance be secured
in all installations. Always turn off the pilot and the fuel supply at the source, prior to moving the mobile home.
After moving the mobile home and prior to lighting the appliance, ensure that the logs are positioned correctly.
This appliance is certifi ed to be installed in an aftermarket permanently located, manufactured (mobile) home,
where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible
for use with other gases, unless a certifi ed kit is used.
Conversion Kits
This appliance is fi eld convertible between Natural Gas (NG) and Propane (P).
To convert from one gas to another consult your Authorized dealer/distributor.
29.1C
Summary of Contents for CB30NTR
