Contec CNT24-4(PCI)H User Manual Download Page 8

Page: 8 / 65

1. Before Using the Product

CNT24-4(PCI)H

Before Using the Product

This chapter provides information you should know before using the product.

About the Board

The CNT24-4(PCI)H is a PCI bus-compliant interface board that counts input pulse signals from

external devices.

The CNT24-4(PCI)H has four channels of 24-bit up/down counters, allowing external devices such as a

rotary encoder and a linear scale to be connected. Given below are examples of using the board for

“detecting a position of the table of a machine tool” and “detecting a change in weight”.

The pulse signal inputting interface is photo coupler isolated or TTL-level input.

Using the bundled driver library [API-PAC(W32)], you can create Windows application software for

this board in your favorite programming language supporting Win32 API functions, such as Visual Basic

or Visual C/C++.

< Example >

Linear Scale

- Detecting a position of the table of a machine tool

Processing thing

Tool

Power supply

RelayBOX

CNT24-4(PCI)H

Encoder

- Detecting a change in weight

Power supply

Rack

CNT24-4(PCI)H

Features

It is equipped with four channels of 24-bit up/down counters.

The board can count two-phase signals, which can be outputs of some rotary encoders and linear

scales

You can select either a photo coupler isolated input or a TTL-level input for each channel by

software command.

Each channel can generate an interrupt request signal and a one-pulse output signal when the count

data matches a pre-specified value.

The board is equipped with a programmable timer to allow interrupts to be generated periodically

according to a specified timer value.

Each Channel is equipped with

general-purpose input signal (both photo coupler and TTL-level).

Summary of Contents for CNT24-4(PCI)H


































































Search results

Summary of Contents for CNT24-4(PCI)H

Reviews:

Related manuals for CNT24-4(PCI)H

Brands by name

Popular brands

Contec CNT24-4(PCI)H, User Manual

Search results

Summary of Contents for CNT24-4(PCI)H

Reviews:

Related manuals for CNT24-4(PCI)H

Brands by name

Popular brands