Contec CNT24-4(PCI)H, User Manual

Page: 62 / 65

6. About Hardware
CNT24-4(PCI)H
55
6. About Hardware
This chapter provides hardware specifications and hardware-related supplementary information.
Hardware specification
Tables 6.1 list the hardware specifications of the board.
Table 6.1. Specification
Item Specification
Counter Input
Number of Channels 4 Channels
Count system Up/down counting
Max. count FFFFFFH (binary data)
Counter input type Photo coupler isolated input or TTL-level input
Counter input signal Phase-A/UP 1 x 4 channels
Phase-B/DOWN 1 x 4 channels
Phase-Z/CLR 1 x 4 channels
General-purpose input 1 x 4 channels
Input register 220 Ω (photo coupler insulation) or more, 1TTL loading (TTL-level)
Input protection circuit None
Response frequency Photo coupler isolated input 500KHz duty 50% (Max.)
TTL-level input 1MHz duty 50% (Max.)
Interrupt level One interrupt caused upon channel count match or timer time-out
External power 5V - 12VDC ±10% Min. 400mA
(Required for photo coupler isolated input)
Photo coupler input
current Photo coupler primary current 15 - 25mA
Digital filter 0.1 µ sec - 1056.1 µ sec (can be independently set for each channel.)
Timer 1msec - 200sec
Match signal output
Output point 1 x 4 channels
Output type Photo coupler isolated open collector output
Output rating 35VDC, 50mA(Max.) (per 1 point)
Output signal width 0 - 104.45msec (All channels)
Output protection circuit None
External power 5V - 12VDC±10%
Common
I/O address 8 bits x 32 ports boundary
Power consumption 5VDC 250mA Max.
Operating condition 0 - 50°C, 10 - 90%RH (No condensation)
PCI bus specification 32bit, 33MHz, Universal key shapes supported *1
Dimension (mm) 176.41(L) x 105.68(H)
Weight 130g
*1 This board requires power supply at +5V from an expansion slot (it does not work on a machine with a +3.3V power
supply alone).