CONSTRUCTA CC4W91860, Instruction Manual

Page: 54 / 140

en
Cleaning
54
Microfibre cloth
The microfibre cloth is especially suitable for cleaning
easily damaged surfaces, such as glass, glass ceramic,
stainless steel or aluminium. It removes liquid and
greasy deposits in one go.
Order no. 466 148
Conditioning cloth for stainless steel surfaces
You can treat surfaces with a tested, recommended oil-
impregnated conditioning cloth (available from us),
which will make the surface more resistant to
fingerprints and scratches.
Order no. 311 134
Conditioning oil for modern stainless steel surfaces
This is the same conditioning oil that is used in the
cloths, and can be ordered from us in a bottle.
Order no. 311 567
Degreaser
For intensive removal of stubborn grease deposits from
surfaces.
Order no. 311 781
Notes
■
Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
■
Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
Aqualisis
The Aqualisis cleaning function facilitates cleaning of
the appliance in the event of mild contamination.
The programme runs for 8 minutes.
Switching on Aqualisis
1.
Add a few drops of washing-up liquid to a cup of
water. Place a spoon into the container as well to
prevent delayed boiling.
2.
Place the cup with the spoon inside it on the centre
of the turntable.
3.
Touch
>
.
The appliance will switch off automatically after approx.
8 minutes.
Then wipe around the cooking compartment using a
soft cloth and allow it to dry thoroughly.
Area Cleaning products
Appliance front Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaners or metal or
glass scrapers for cleaning.
Display Wipe down using a microfibre cloth or a
slightly damp cloth. Do not wipe with a wet
cloth.
Appliance front with
stainless steel
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Remove patches and splashes of limes-
cale, grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form under
these patches or splashes. Special stainless-
steel cleaning products are available from our
after-sales service or from specialist retailers.
Do not use glass cleaners or metal or glass
scrapers for cleaning.
Stainless steel cooking
compartment
Hot soapy water or a vinegar solution:
Clean with a dish cloth and dry with a soft
cloth.
If the oven is very dirty, use oven cleaner, but
only when the cooking compartment is cold. It
is best to use a stainless-steel sponge. Do not
use oven spray or any other aggressive oven
cleaners or abrasive materials. Scouring
pads, rough sponges and pan cleaners are
also unsuitable. These items scratch the sur-
face. Allow the interior surfaces to dry thor-
oughly.
Recess in the cooking
compartment
Damp cloth:
Water must not be allowed to run into the
appliance through the turntable drive.
Turntable and roller
ring
Hot soapy water:
When placing the turntable back into its
recess, it must engage properly.
Wire rack Hot soapy water:
Clean using stainless-steel cleaner or clean in
the dishwasher.
Door panels Glass cleaner:
Clean with a dish cloth. Do not use glass
scrapers.
Seal Hot soapy water:
Clean with a dish cloth and do not scour. Do
not use metal or glass scrapers for cleaning.
Accessories Hot soapy water:
Soak and then clean with a dish cloth or a
brush.
Area Cleaning products