background image

LIMITED WARRANTY

For a period of two years following the date of delivery,

CONMED Corporation warrants the

CONMED 1000SES

TM

Smoke Evacuation System

against any defects in material or workmanship and will

repair or replace (at CONMED’s option) the same

without charge, provided that routine maintenance as

specified in this manual has been performed using

replacement parts approved by CONMED. This warranty

is void if the product is used in a manner or for purposes

other than intended.

© 1999 CONMED Corporation

Mailing Address:
310 Broad Street

Utica, New York 13501 U.S.A.

Shipping Address:

7211 S. Eagle St.

Englewood, Colorado 80112 U.S.A.

For Technical Services or Return Authorization Phone:

303-699-7600 / 1-800-552-0138  Extension 5274

FAX: 303-699-1628

For Customer Services or to order parts phone:

1-800-448-6506 / 315-797-8375 / FAX: 315-735-6235

or contact your CONMED Representative.

European Authorized Representative

MDSS GmbH

Burckhardtstr 1

D - 30163 Hannover

Germany

The revision level of this manual is specified by the

highest revision letter found on either the inside front

cover or enclosed errata pages (if any).

Manual Number 60-6852-ENG Rev. -

60-6852-ENG (-).qxd  2/1/99  12:40 PM  Page 2

Summary of Contents for 1000 SES



























Reviews: