ConMed 1000 SES, Service Manual

Page: 16 / 26

5-2
ed at the factory. This approach allows quick
repair with a minimum of downtime.
The motor/blower is a specially designed high
suction/high flow rate centrifugal air pump. This
motor/blower is controlled by a triac on the con-
troller PWB and runs on mains power. This
motor/blower is rated at 115 CFM and a static
suction of 97" H
2
O. Replacement brushes for this
AC motor are available from CONMED
Technical Services (See Section 4.0). Refer to the
parts list in the Maintenance section of this manu-
al for the correct motor part number depending
upon the mains voltage available.
Figure 4 Air Flow Diagram
60-6852-ENG (-).qxd 2/1/99 12:40 PM Page 5-2