Operating Instructions
LASSTEC
Weighing System 0521
BAL0521-0001-EN
www.conductix.com
translated document
page 62 of 123
In this chapter you can define the thresholds of the overload and eccentricity alarms according to the overall system capacities and the
spreader positions as well as modify the parameters for
Snag load
detection,
Dragging detection
and
not carrying
detection.
DANGER!
The thresholds directly influence the alarms generated by the Lasstec system!
Wrongly adjusted thresholds can lead to wrong alarm or no alarm at all.
Conductix-Wampfler will not be responsible for system malfunctioning if the adjustment is not
correctly done.
The Lasstec Overload, eccentricity, snag load, dragging and not carrying detection are to be used
only as an informative function and in no case as a security-relevant function. Conductix-Wampfler
is not to be held responsible for injuries or damage caused by an un-triggered or disregarded alarm.
Each parameter which is meant to be modified if necessary is displayed in three states:
•
Current Value:
Actual value of the parameter
•
Default Value:
The
default value of the parameter predefined during the manufacturing process. If the
Current Value
and the
Default Value
are
not identical
,
it means that this parameter has been changed at least once.
•
Desired Value:
There you can
enter the new value of the parameter you want to change and by clinking
Overwrite the current Value
it will be
stored in the interrogator and displayed as
Current Value.
5.3.8.3.1
Load & Overload
DANGER!
The Lasstec load and overload detection is to be used only as an informative function and in no
case as a security-relevant function. Conductix-Wampfler is not to be held responsible for injuries
or damage caused by an un-triggered or disregarded alarm.
