Conductix-Wampfler LASSTEC 0521 Operating Instructions Manual Download Page 104

Page: 104 / 123

Operating Instructions

LASSTEC

Weighing System 0521

BAL0521-0001-EN
www.conductix.com

translated document

page 104 of 123

Information detail:

This page allows to configure the home page with the following parameters:



Crane number (this parameter is used with TCP/IP communication).



Enable / Disable the TOS TCP/IP communication.



Enable / Disable the TOS Bluetooth communication.



Enable / Disable data logging with only container weight.



Enable / Disable SDO cyclic during datalog.



Enable / Disable alarm (You have to push the button “SAVE PARAM. to validate your choice).

= Only available with the twin-lift system.

Navigation:

Button

Action

1_1

Go on page set date and time.

1_2

Go on page counters.

1_3

Go on page config TCP/IP.

3_2

Save alarms configuration. This button is disable when the system is lock.

3_3

Go on page about.

3_4

Exit the current page and go on configuration home page.

Navigation: select the previous editable element

DOWN

Navigation: select the next editable element

PUSH

Edit the selected element.

Enable or disable the selected.

DANGER!

Alarms that are deactivated no longer appear on the main screen and are not

displayed on the error page.

Summary of Contents for LASSTEC 0521




























































































































Search results

Summary of Contents for LASSTEC 0521

Reviews:

Related manuals for LASSTEC 0521

Brands by name

Popular brands

Conductix-Wampfler LASSTEC 0521, Operating Instructions Manual

Search results

Summary of Contents for LASSTEC 0521

Reviews:

Related manuals for LASSTEC 0521

Brands by name

Popular brands