Installation Instructions
Expansion Module and Expansion Element
Program 0815
MV0815-0005a-EN
www.conductix.com translated document
page 9 of 26
6
Installation
6.1
Safety
Installation and initial commissioning may only be carried out by specially trained technicians.
Required protective equipment:
DANGER!
Injury due to improper installation and initial commissioning!
Improper installation and initial commissioning can result in serious injury to persons
and/or material damage.
Before starting work, make sure there is sufficient space for assembly.
Handle open, sharp-edged components carefully
Make sure the installation area is tidy and clean! Loosely stacked or scattered
components and tools are a source of hazards
Install components properly. Comply with the specified screw tightening torques
DANGER!
Poisonous gases in case of fire!
In case of fire in the facility, the plastic parts (PVC) of the conductor-rail system emit
poisonous gases (HCL).
The system operator must take this into account accordingly when planning and
take the appropriate protective measures
The building must be evacuated immediately.
The fire brigade must be informed.
DANGER!
Risk of injury by crushing skin and limbs!
There is a danger of crushing of skin and limbs!
Wear safety gloves when working on the expansion module.
Only install conductor rail systems where suitable operation conditions pertain
(see section 3.3 in BAL0815-0002-EN)
