Installation Instructions
Expansion Module and Expansion Element
Program 0815
MV0815-0005a-EN
www.conductix.com translated document
page 5 of 26
4
Structure of an Expansion Module
The expansion elements (1) are preassembled at the factory as multipole expansion modules. They are preferred for
use in new systems. The expansion module includes two expansion elements per pole, each with an expansion dis-
tance of 8 mm. This means that each expansion module has a total expansion distance of 2x8 mm = 16 mm.
The expansion module includes hanger clamps (3) and the wiring for the expansion elements. The wiring (cable loop)
is placed on the back of the expansion module. The adjustment aid (2) (not included in delivery) is used to adjust the
expansion elements during installation. The roughly 1.25 m long assemblies are engaged in hanger clamps on the
structure and connected with the segment using rail connectors.
NOTICE!
The adjustment aids are separately available as an adjustment aid set
(material no.: 08-Z009-0014P).
Fig. 2: Expansion module
3
1
2
Item Name
1 Expansion
element
2 Adjustment
aid
3 Hanger
clamp
